barrierefrei



Home : Products : General Lab Products : PARAFILM® M : Physical properties


Physical properties
Toxicity: non-toxic
Melting point: 60 °C
Flash point: 301 °C
Temperature range (continuous use): -45 °C to +50 °C
Stretching ability: 200%
Elongation at tear: 300%

Gas permeability in 24 hours at 23 °C and 50% relative humidity:
O2 (oxygen): £ 350cm³/m²
N2 (nitrogen): £ 105cm³/m²
CO2 (carbon dioxide): £ 1100cm³/m²

Water vapor permeability in 24 hours at 37 °C and 90% relative humidity: 0.8 g/m² (Vapor pressure from volatile substances may lift PARAFILM®M off the edge of the vessel.)

Physiological properties
PARAFILM®M is free from plasticizers and consists primarily of polyolefins and paraffin waxes. If PARAFILM®M comes into contact with food, the relevant regulations should be observed.

Storage life
3 years without deterioration, if stored between 7 °C and 32 °C and 50% relative humidity.

Chemical resistance
PARAFILM®M is resistant up to 48 hours against many polar substances, e.g. saline solutions, inorganic acids and alkaline solutions. After this period embrittlement may occur.

 

Effects of 48 hours exposure at 23°C:
 Acids:  Hydrochloric acid 36.5% resistant 

Sulphuric acid 98% resistant
   Nitric acid 95% resistant (brown discoloration)
 Alkaline solutions:  Sodium hydroxide 22% resistant 
   Ammonia 28% resistant 
Saline solutions:  Sodium chloride 20% resistant 
   Potassium permanganate 5% resistant (brown discoloration) 
   Iodine solution 0.1 mol/l resistant (brown discoloration) 
Organic solvents:  Methyl alcohol resistant 
   Ethyl alcohol resistant 
   Isopropyl alcohol resistant 
   Diethyl ether not resistant 
   Chloroform not resistant 
   Carbon tetrachloride not resistant 
   Benzene not resistant 
   Toluene not resistant 
PARAFILM®M conforms to the general requirements of the FDA (Federal Food, Drug and Cosmetic Act. USA) if used below 55°C. 



Titel: Physical properties

Link: http://www.brand.de/en/products/general-lab-products/parafilmr-m/physical-properties/printer.html


Copyright © www.brand.de 2012
All rights reserved.
Copyright contents may not be reproduced in any manner. Pictures and texts are not binding and subject to changes. We have carefully checked the contents of this website. However, BRAND GMBH + CO KG cannot accept responsibility for errors, omissions or possible obsolescence.

Close window